Posted on 2 Comments

Thunder Tiger-Spare Parts-Helicopter

Thunder Tiger Helicopter Spare Parts- Viks Hobbies.

Raptor Spare Parts-Thunder-Tiger-Helicopter. In Stock.

List of parts we have in stock to order.

Need a Different Thunder Tiger Spare Parts -Helicopter-Plane.  Contact Us

AK0031–86T MAIN SPUR GEAR,R30=$16.90

AK0148–Main SPUR GEAR, 85T/R- $19.90

AV0038–COOLING FAN ASSY,R30 HEL=$27.20

PV0004 MIXING LEVER,R30/50= $15.90

PV0005– Flybar Control Rod,R30=$6.90

PV0013–Elevator Arm, R30= $19.90

PV0014–ELEVATOR LEVER 30HELI +$8.80

PV0015–AILERON LEVER 30 Heli=$21.90

PV0017–TAIL PITCH SLIDER,R30=$19.50

PV0019–ONE WAY CLUTCH,R30,50T=$49.90

PV0021– GUIDE PULLY ASSY.,R30=$9.30

PV0027–Tail Case,R30=$14.90

PV0029–TAIL PULLEY,R30=$9.50

PV0035-3–Landing SKID,X50=$8.00

PV0037-TAIL ROTOR BLADE,R30=$7.90

PV0038–Tail Fin,R30=$16.50

PV0040– Double Link.R30=$2.50

PV0041–BALL LINK,R30=$9.90

PV0053–ROTOR BOLT,R30=$3.90

PV0058–LINK BALL,4.8=$17.50

PV0068–Al Coil, Servo Tray,R30=$122.50

PV0119 Fuel Tank, 330.c/R30 =$22.50

PV0148–TAIL ROTOR GRIP,R60=$12.80

PV0149-1–TAIL GEAR,X50= $9.50

PV0161–LANDING SKID,X60=$29.90

PV0209–Washer,d4xD11.7=$5.70

PV0279–TAIL ROD GUIDE,R30=$4.90

PV0312–HEADER TANK SUPPORT=$5.50

PV0349–Push/Pull ELEV LEVER,R30=$49.90

PV0355–SPINDLE, R30V2=$11.00

PV0357– Swashplate R30V2=$56.90

PV0358–CLUTCH BELL,R30V2=$39.90

PV0361–STARTER COUPLING,R30V2=$10.00

PV0367–PINION GEAR, R30V2=$11.70

PV0380–10T Pinnon Gear R50V2=$11.50

PV0381–FLAP DAMPER,70/R30V2=$4.00

PV0409–ONE WAY CLUTCH,R90= $46.20

PV0532-1– Clutch Liner,X50=$8.00

PV0661-1–FLYBAR CONTROL ARM,X50=$15.90

PV0671-1– CLUTCH BELL SET,X50= $17.50

PV0679–Tail Support,4854=$17.90

PV1310-1 CANOPY BRACKET,X50=$5.50

PV1312–FLYBAR JOINT BALL LINK=$3.60

PV1313-1–ARM COLLAR,X50= $4.90

PV1319–DOUBLE LINK,X50=$3.70

PV1320–COLLAR SET,X50

PV1321– METAL SEESAWVHUB,X50=$39.90

PV1336– LINKAGE ROD SET ,X50=$5.00

PV1339–OUTER DAMPER(7mm),X50=$5.50

PV1340–MAIN GEAR WASHER,X50=$2.00

PV1341-2– MAIN GEAR COLLAR-R50,X50=$2.00

PV1345– PHASING CONTROL TRACK=$6.50

PV1361–SPINDLE SET(7mm),X50=$6.50

PV1371–TAIL GEAR SET= $4.50

PV1376–TAIL DRIVE SHAFT BRG SET=$9.90

PV1391–F. TAIL DRIVE GEAR SET= $5.90

PV1415–M,TAIL SUPPORT BRACKET= $16.50

PV1416–METAL TAIL PULLY 9T=$15.90

PV1423–TAIL SUPPORT BRACE,X50E= $5.90

PV1426– MOTOR PINION 13T, X50E= $12.50

Raptor3800– Blade Support/Carrier=$7.50.

Raptor3803-Remote Glow Adapter=$13.50

For more information Contact Us

Parts for Helicopter And Air Craft.

Happy Flying.

E-Mail. vik@vikshobbies.com

Viks Hobbies & Models

Online Shop.

Posted on Leave a comment

Thunder Tiger The Raptor E700 V2

Thunder Tiger The Raptor E700 V2  Code- TTR4761-K20

700

The Raptor E700 V2 with sleek fuselage!

With the colourful body scheme designed by Miss Simone Zunterer, this 7001fiberglass made fuselage has great visibility in the air. The two-piece fuselage is easy to install and maintain.

The battery could be replaced within seconds without remove the fuselage. Catch up with this beautiful beast now!

 


Major aluminum parts are packed in box

The mainly contents as below:

  • CNC milled aluminum flybarless main rotor head.
  • 7002CNC milled aluminum swashplate is also designed for flybarless, and same 135 degree as E720 and E800 for eCCPM. 140 degree setting is available.
  • CNC milled alumium 12mm main shaft bearing block with care of light weighted.
  • Main shaft is 12mm in diameter, with heat treatment, and hollowing for weight reducing.
  • ——————————————————-
  • Quick-release Battery Tray allows two 6 cells LiPo battery packs

    Quick-release battery holder could take two 6-cell or one 12-cell LiPo battery. Also, from its design, you don’t have to remove the shell while 7003you changing the battery. U-shape landing skids are good for battery exchange and installation. Also, its lower frame structure makes the centre of gravity close to head grips, which means that E700 could be more stable when it starts doing some flips and rolls.

  • ——————————————————-
  • One-piece Tail Case with Efficient Helical Bevel Tail Gears

    Tail drive gears are made of nylon material, and the structure use Helical bevel gear which is carried over from E720’s structure. Also, aluminum 7004tail boom with lengthened supports for additional rigidity and mounted rudder servo for improved performance. Optimized tail rotor for wide range of head speeds; accommodates 105-116mm tail blades.

  • —————————————————
  • Recommended Optional Part :E700 Power Pack

    No need to experiment with different brushless motor and ESC combinations — the Power Pack delivers the best of both in a single, 7005powerful package. It pairs the performance of an ACE R/C OBL 50/05-50H brushless outrunner motor to the precision control of a Castle Creations Phoenix Edge HV120 ESC. The Edge HV120 arrives with basic performance parameters already programmed in, but modelers can also fine-tune performance using the optional Castle Field Link Programming card or Castle Link USB adapter (both available separately) and free downloadable Castle Link software.

  • —————————————————–
  • Recommended Optional Part :GT5.2 3-axis Gyro

    • OLED Display with icon-based user interface
    • Touch-Pad’ for easy programming without the need of additional hardware
    • 7006High-quality aluminum case for optimal heat dissipation
    • Brand new easy menu, more user friendly
    • Supports Receiver type: normal PPM , Spektrum & JR satellite, Futaba S-Bus , HOTT, SRXL, SPPM
    • Updater support-firmware can be updated as well as the parameter can be modified on your PC
    • ——————————————————
    • Recommended Optional Part :DSHV0507nT Servo

      DSHV0507nT is well equipped with high performance coreless motor, super narrow pulse (760us) drive system and high speed processing 7007boosts gyro response. DSHV0507nt working on 2S Lipo/LiFe battery without any regulator, the combination of Titanium and alloy aluminum gears also enhance strength for continuous Slop-Free Operation and reduce weight.

    • —————————————————
    • Recommended Optional Part :DSHV0818T Servo

      DSHV0818T is high voltage standard size servos that deliver unparalleled performance, equipped with high performance coreless 7008motor, work on 2S Lipo/LiFe battery without any regulator.

    • The combination of Titanium and alloy aluminum gears enhance strength for continuous Stop-Free Operation as well as reducing weight.
    • For more Information and price please Contact Us
    • For Raptor Spare Parts Available.